Demonstration Guide |
![]() |
|||||||||||||||||||||||
|
||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
7. Assigning ParametersReal time control of parameters during performance is one of the strengths of the Millennium. Let's control the speed of the Reverb Level in Preset 7 '65 Twin Bright. This can be done 2 different ways: 1. Using an Expression Pedal for level control. 2. Toggling between 2 different levels with a foot switch. Here is how to do it: 1. Select the Level parameter on page 2 of the Reverb effect by turning the #4 knob. 2. Press the assign button again. |
||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||
| 3. Move an Expression pedal or select a foot switch.
4. Set the Min and Max Level using the #3 and #4 knobs. 5. Press the Preset button. |
||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||
| Now you can change the speed of the Tremolo during live performance. This can be done gradually between the Min and Max speed with the Expression Pedal or between the 2 different speeds with the foot switch.
NOTE: If another parameter is assigned to either the foot switch or the pedal, you must un-assign them to avoid controlling both the new and old parameters together. |
||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||